SPARTUS®
EasyCUT 40
LITTLE DIMENSIONS SOURCE, GREAT POWER, EXCELLENT QUALITY OF CUTTING.
Technical parameters
| Input | ~1 × 230V ± 10% 50 / 60 Hz |
| Cutting current [A] | 20 – 40 |
| Max. cutting thickness [mm] | 25 |
| Duty cycle [%] | 60 |
| PLASMA PARAMETERS | |
| Output working voltage [V] | 88 - 96 |
| Recomended work pressure [bar] | 5 |
| Air consumption [l/min] | 150 |
| Post gas flow |  |
| Contactless pilot arc ignition (no HF) | |
| OTHER | |
| Current consumpiton [A] | 32 |
| Power factor (cosφ) | 0,7 |
| Efficiency η [%] | 80 |
| Insulation class | H |
| Protection class | IP23 |
| Weight [kg] | 8,5 |
| Dimensions [mm] | 460 × 146 × 290 |
Description:
This is small size inverter plasma cutter. Designed for cutting metals and other electrically conductive materials. It is powered with single-phase 230V source power.
Through the use of modern technology, we were able to get a light and compact plasma cutter with maximum power of 40 amps, which a maximum cutting thickness equals 25 mm.
EasyCUT 40 has a simple-to-use function panel with adjustment knob which gives ability to adjust the cutting power between 20 - 40 amps.
The cutter is equipped with a pressure reductor with air filter which is mounted at the rear of the casing, in a place specially designed for that purpose (protection against damage eg. during the move).
EasyCUT 40 device has a lot of modern solutions to support the process of plasma cutting and functioning of the device. Built-in system of contactless pilot arc ignition without HF - provides excellent quality of cutting edge and longer life of consumables.
Examples of use: workshop, portable repair, production.
Package equipment:
EasyCUT 40 device
Plasma torch SPARTUS® 45H 6m
PLASMA toolbox (consumable kit)
3m work clamp
Air filter with the pressure control
Air hose
User’s manual
Package price [EUR]:
* used with retaining cap – 6 holes (60389)
